Mitel 3300 IP Phone User Manual


 
General Information Guide - Release 3.1
- 53 -
Feature Name: Description:
Call Release See Release.
Call Rerouting Call Rerouting lets the system redirect calls to alternate answering
points or devices under specified conditions. Call Rerouting may be
used to redirect calls always (in Day, Night 1, and/or Night 2 mode)
or under busy, no answer, or Do Not Disturb conditions.
Call Split See Conference Split.
Call Swap See Swap.
Call Transfer See Transfer.
Call Waiting Swap Call Waiting Swap lets you use the switch hook to alternate
between two calls when a party is in Call Waiting for your station or
when you have a call on Consultation Hold.
Camp-on (Call Waiting) Camp-on, or Call Waiting, lets you notify a busy party that you are
waiting. An attendant may also put a call through to a busy station
to indicate they are waiting. Upon hearing the Call Waiting tone,
the busy party can either respond or finish the current call.
Camp-on Tone Security Camp-on Tone Security prevents you from hearing Camp-on tone.
If any party in a call has this option enabled, no Camp-on tone is
returned to anyone in the call.
Centralized Attendant Service
(CAS) interface
See Attendant CAS Interface
Class of Restriction
Class of Restriction (COR) limits a stations access to specified
numbers. A station may have three CORs (Day/Night1/Night2
service), and the COR may also be changed by using a Verified
Account Code.
Class of Service
Class of Service (COS) defines a station or trunks feature and
timer options. A station or trunk may have three COSs
(Day/Night1/Night2 service), and the COS may also be changed by
using a Verified Account Code.
Clear All Features Clear All Features lets you cancel most of the features activated on
your extension or another users extension.
Compression
Compression allows IP calls to be made utilizing less bandwidth
than an uncompressed call.
Conference Conference lets you connect three or more people into a single
telephone conversation. While you are in a Conference, you can
use any of the features that would normally be available during a
two-party call.
Conference Split
Conference Split lets you separate a 3-party conference so that
you can speak privately with one of the parties. While you are
speaking privately with one party, the other party is on Consultation
Hold.
DASS II Voice I
Allows basic calls to be made from the system to a DASS II
protocol Central Office, using CEPT Digital Trunks and DASS II
signaling.
Date and Time
The date and time is set through the System Administration Tool.
This data appears on all Station Message Detail Recording
(SMDR), traffic measurements, data dumps, display telephones,
and attendant consoles.