Filter
Top Products
Version 2.0
OptimusPDA SP5700 Series User Manual
Copyright © 2007 29 March 2007
Metrologic, Inc.
* To check your network connection status, select the icon on the Taskbar, and then
click on the Wireless Information tab. The Signal Strength is indicated as Very Good or
Good etc…
Picture 40 Network connection icon Picture 41 Connection status
• To check the IP address data has been entered correctly, select the IP Information
tab.
Note: IP address data is not lost when a soft reset is performed. However, it should be re-
entered again, if a hard reset has been executed.
5.6 GSM / GPRS
The GSM/GPRS functionality allows your PDA to be used to make phone calls as well as send
data over a cellular network at moderate 2.5G data speeds.
In order to set up a GPRS connection, it may be necessary to specify the Access Point Name
(APN), user name and password, and very often IP address, all provided by the network
operator.