Filter
Top Products
29
••
••
• Check the telephone line cord connections.
••
••
• Check the batteries for proper installation.
The Caller ID panel is
blank
The Caller ID does not
show the caller's name
and / or phone number.
••
••
• The Caller ID unit will not function until you have Caller
ID service provided by your local phone company. Call
your local phone company to have Caller ID installed on
your telephone line.
••
••
• If you pick up the phone before the second ring, the caller
information will not be correctly received. If you have tele-
phone answering device (TAD) connected with the unit,
set the TAD to answer after two rings or more.
••
••
• If it is a blocked call or an out-of-area call, the caller's
name and / or phone number will not appear on the
display.
••
••
• If only the caller's phone number appears on the display,
it may be a Single Data Message Format (SDMF) call,
as opposed to a Multiple Data Message Format (MDMF)
call. Please call your local phone company to see which
service you have.
Random characters
and / or "NO DATA"
appear on the LCD
Display.
••
••
• On rare occasions, the Caller ID information sent by the
telephone company may have an error in the
transmission. This is not the fault of your Caller ID unit. It
can only capture and store the data that was received.
Cannot get Call Wait-
ing identification on the
LCD Display.
••
••
• Subscription to Caller ID Call Waiting (CIDCW) is required
from your local phone company for the CIDCW function
to operate properly. Call you local phone company for
details.
MPH7895/04281A(English).put 7/5/01, 4:08 PMPage 30 Adobe PageMaker 6.5C/PPC