Filter
Top Products
Operating the Remote Module
4-4
Issue 2 July 1997
NOTE:
You must enter your current valid password. The first time you
use your Remote Module, the password will be the one initially
assigned to you by your system administrator. A valid password
contains 8 to 10 digits.
4. If a valid password has been entered, the Remote Module
completes the connect sequence and the telephone will be
operational. If an invalid password has been entered, you will be
prompted to re-enter the password. If after three attempts a
valid password has not been entered, the Remote Module will
disconnect and the “Go Online?” prompt will be displayed.
Check your current password with your system administrator;
as necessary, reset your password and repeat the procedure
from Step 1.
Disconnecting
To discontinue operation of the DEFINITY Extender system, follow
these steps:
1. Press the Hold button on the display telephone four times. This
screen appears:
2. This “Disconnect” screen allows you to change your mind
before totally disconnecting. To disconnect, press
2
. The
disconnect sequence appears on the display; after a few
seconds the “Go Online?” screen appears. This indicates you
are disconnected.