Filter
Top Products
Installation
Issue 2 July 1997
2-3
Connecting the Remote Module
All connections to the Remote Module are done via the back panel
(see Figure 2-1). Presently no ports are installed for VOICE or
COM 2. The current back panel elements are:
■
LINE is the connection between the Remote Module and the
central office line for transmission of the signaling information to
the Switch Module.
■
PORT is the connection between the DEFINITY telephone and
the Remote Module.
■
COM 1 provides for simultaneous RS-232 communication
between equipment at the off-premise site and equipment at
the on-premise site.
■
COM 2 is reserved for future use
■
+12VDC is the connection for the A/C adapter.
■
The DIP switch under OPT is used for system configuration.
Figure 2-1. Remote Module Back Panel