Filter
Top Products
Programming
3-6
Issue 2 July 1997
Setting the Connect Rate
Setting the Connect Rate establishes the baud rate in kilobits per
second (kbps) for the communications between the Switch and
Remote Modules. Follow the steps and screens below to set the
Connect Rate.
1. At the “Go Online?” screen, press
3
until the following screen
appears:
2. Press 2
to change the connect rate. The following screen
appears:
3. Press
3
until the Connect Rate you want appears. There are
six choices:
■
Auto—(Factory default). When the auto setting is selected,
the module tries to connect at the speed that will provide
the best performance with the fewest errors. The speed will
vary depending on line performance. If the module is
unable to connect at any of the available speeds, an error
message appears.
■
F-- —The Remote Module will connect at 19.2 kbps only,
the fastest rate.