Filter
Top Products
Wireless-G IP Phone
54
Chapter 4: Configuring the Wireless-G IP Phone
Settings of the Wireless-G IP Phone
User Name. To add or change the User Name, select Edit. Enter the new User Name in the new
window. Press the center selection key to save the new setting, or select Exit to return to the
previous screen.
Password. To add or change the Password, select Edit. Enter the new Password in the new
window. Press the center selection key to save the new setting, or select Exit to return to the
previous screen.
Payload Type. G.711a, G.729, and G.711u are the three Payload Types available. They are listed in
order of preference. To change the order of preference, select Edit until the appropriate order of
preference is displayed on-screen.
Packet Time. You have two Packet Time lengths available, Small and Large. To change the time
period, select Edit until the appropriate Packet Time is displayed on-screen.
DTMF Relay. You can enable or disable the DTMF Relay feature. To enable or disable the feature, select Edit.
UDP Port. To add or change the UDP Port number, select Edit. Enter the new UDP Port number in the new
window. Press the center selection key to save the new setting, or select Exit to return to the previous screen.
RTP Port. To add or change the RTP Port number, select Edit. Enter the new RTP Port number in the new
window. Press the center selection key to save the new setting, or select Exit to return to the previous screen.
Figure 4-76: Change
User Name
Figure 4-77: Change
Password
Figure 4-78: Edit
Payload Type