Filter
Top Products
Wireless-G IP Phone
7
Chapter 3: Installing and Using the Wireless-G IP Phone
Overview
Chapter 3: Installing and Using the Wireless-G IP Phone
Overview
This chapter provides instructions for first-time installation and use of the IP Phone. You will insert the battery
into the IP Phone and then set it up for your wireless network and Internet phone service. Then you will be able
to make and receive Internet phone calls.
Inserting the Battery into the Wireless-G IP Phone
To insert the battery, follow these instructions:
1. Remove the cover of the battery compartment. Push down on the button and slide the cover downward.
2. Insert the battery. Make sure the metal contacts of the battery line up with the metal contacts of the
battery compartment.
3. Insert the door and slide it upward until it snaps into place.
Proceed to the next section, “Powering on the Wireless-G IP Phone.”
Figure 3-1: Press
the Button
Figure 3-2: Insert
the Battery
Button
Metal Contacts