Filter
Top Products
Wireless-G IP Phone
13
Chapter 3: Installing and Using the Wireless-G IP Phone
Setting up the Wireless-G IP Phone
4. The IP Phone will automatically connect to the network you have selected.
If WEP security is enabled on the selected network, a new screen will appear. Using the
navigation pad, select the appropriate transmit key number and then move to the WEP Key field.
Enter the network’s WEP key. Press the center selection key.
If WPA security is enabled on the selected network, a new screen will appear. Enter the
network’s WPA key. Press the center selection key.
5. You will be notified when the IP Phone has connected to the network, and a checkmark will
appear next to the name of the network.
Select Exit.
Figure 3-9: Enter WEP
Key (Secured Network)
Figure 3-8: Connect to
Wireless Network
Figure 3-11: Successful
Connection
Figure 3-10: Enter WPA
Key (Secured Network)