Filter
Top Products
Wireless-G IP Phone
43
Chapter 4: Configuring the Wireless-G IP Phone
Settings of the Wireless-G IP Phone
Auto Switch, Share Key, or Open System
Encryption. You have a choice of Disabled and WEP encryption. To change the Encryption method, select
Edit. If you select Disabled, there are no other settings to change. If you select WEP, there are three more
settings available, Key Index, WEP Key, and 802.1x.
Key Index. For the index of transmit keys, you have a choice of 1-4. To specify which WEP key the IP Phone
will use, select Edit. A new window will open. Scroll through the numbers, and select the appropriate
transmit key number. Select Save to save the new transmit key number, or select Exit to return to the Add
Profile menu without changing the number.
WEP Key. To enter the WEP Key, select Edit. Enter the new WEP Key in the new window. Press the center
selection key to save the new WEP Key, or select Exit to return to the Add Profile menu without changing the
key.
802.1x. You have a choice of Enable and Disable. The Enable option configures the IP Phone for a network
using 802.1x authentication. To change the 802.1x setting, select Edit.
If 802.1x is enabled, configure the EAP Type setting. Select Edit. You have a choice of TLS, MD5, and PEAP.
Select Save to save the new EAP Type, or select Exit to return to the Add Profile menu without changing the
EAP Type.
WPA-PSK
WPA Key. To enter the WPA Key, select Edit. Enter the new WPA Key in the new window. Press the center
selection key to save the new WPA Key, or select Exit to return to the previous menu.
Figure 4-43: Edit WPA
Key
Figure 4-42: Change
Transmit Key