Filter
Top Products
14
IP Phone User Guide – 3-Way Conference and Transfer
Three Way Conference Calls
To initiate a conference call, press the soft button under conf during an active call.
• The first call is placed on hold, and you will hear a dial tone.
• Dial the second person’s telephone number. You will be talking privately to the
second party when he picks up (first call remains on hold).
• To start the conference call, press the soft button under conf again; all three
parties will be participating in a conference call.
Note: If you hang up, the other two parties will be disconnected.
Attended Transfer (Using the Phone Menu)
To initiate a transfer, press the soft button under xfer during an active call.
• This places the first call on hold and you will hear a dial tone.
• Dial the second person’s telephone number. You will be talking privately to the
second party when he picks up (first call remains on hold).
(Note: You can also enter Extensions or Quick Dial numbers using this
method.)
• To connect the call to the second person, press the soft button under xfer again
to complete the transfer.
• You will be disconnected from the call.
If you hang up during the call with the second person before pressing xfer, the transfer is
not completed, this only ends the call with the second person.
Unattended (Blind) Transfer (Using the Phone Menu)
To initiate an blind transfer, press the soft button under xfer during an active call.
• The first call is placed on hold and you will hear a dial tone. You can now dial the
second person’s telephone number.
• While the second person’s phone is ringing, press the soft button under xfer
again to complete the transfer, and you will be disconnected from the call.
Connected 0:04:33
To: 14045557354