Filter
Top Products
10
IP Phone User Guide – Volume and Speaker Buttons
Volume Adjustment
Speaker Button
Using the Handset, Speakerphone or Headset
Calls can be made or received using the handset, speakerphone or headset and
you can switch audio devices during a call. Adjust the volume for the device you are
using with the volume adjustment bar.
Using the Handset
To place and answer calls using the handset, simply lift the handset.
Using the Speaker
To place and answer calls using the speaker, press the speaker button.
The green light behind the button will illuminate.
Using the Headset
Plug an approved headset with a 2.5mm connector into the headset port on the right
side of the phone. Press the headset button and the green light behind the button
will illuminate. For information on the exact models of headsets that are supported,
see the IP phone information on http://www.linksys.com
Switching Between the Handset/Headset/Speakerphone During a Call
Any of the audio devices can be used during a call. Only one device at a time can
be used. The handset can be on the hook when using the speakerphone or headset
function. If switching from the handset, make sure the speakerphone or headset
light is illuminated before placing the handset back on the hook.