Lennox Hearth 8662 Intercom System User Manual


 
40
Inter-Tel
®
Model 8662 User Guide (ITP Mode)
GETTING STARTED
USING DO-NOT-DISTURB MODE
If you are away from your desk, or if you do not want to be disturbed, you can use the
DND feature. This halts all pages and calls to your endpoint, except queue callbacks,
recalls, and direct ring-in calls. When other users call your endpoint, they hear a
repeating signal of four fast tones and, if they have a display endpoint, see the DND
message you have selected.
Your telephone system can have up to 20 different DND messages, each of which can
be changed by the system administrator, installer, or programmer. Your trainer or sys-
tem administrator will give you a list of the programmed DND messages. For conve-
nience, you should update the following default list.
Because the system DND message only uses one line of your display, you can enter a
second line of text, up to 16 characters. For example, if you select 03 (IN MEETING
UNTIL) as your first line of text, you can enter “3:30” as your second line. Callers
with a display endpoint will then see, “IN MEETING UNTIL 3:30.”
To enable DND:
1. Press or the DND menu button.
2. EITHER, Dial the two-digit number corresponding to the message you want to
use.
OR, Press the SCROLL menu button followed by the PREVIOUS or NEXT
menu button.
OR, press the (high) or (low) end of the volume button to scroll through
the messages.
DEFAULT MESSAGE NEW MESSAGE DEFAULT MESSAGE NEW MESSAGE
01 DO-NOT-DISTURB 11 OUT OF TOWN ’TIL
02 LEAVE A MESSAGE 12 OUT OF OFFICE
03 IN MEETING UNTIL 13 OUT UNTIL
04 IN MEETING 14 WITH A CLIENT
05 ON VACATION/
HOLIDAY ’TIL
15 WITH A GUEST
06 ON VACATION/
HOLIDAY
16 UNAVAILABLE
07 CALL ME AT 17 IN CONFERENCE
08 AT THE DOCTOR 18 AWAY FROM DESK
09 ON A TRIP 19 GONE HOME
10 ON BREAK 20 OUT TO LUNCH
DND