Filter
Top Products
12
Inter-Tel
®
Model 8662 User Guide (ITP Mode)
FINDING YOUR WAY
WHAT YOU SEE AND HEAR
As you can see, your Model 8662 and telephone system come equipped with many
features. To help you understand what everything means, it is recommended that you
read the following information before you use your endpoint:
• A red lamp indicates that a call is ringing, holding, or active on your endpoint.
• The endpoint’s lamps may be solidly lit or flashing to indicate the status of a call
or feature. To avoid confusion, this guide uses different icons to signify that a
lamp is unlit ( ), lit, ( ), or flashing ( ).
• If you hear four fast tones or repeating fast tones (reorder tone), you have pressed
an invalid button combination, tried to select a restricted line, dialed a restricted
or invalid number, dialed too slowly between digits, or waited too long before
performing the next step. Hang up and try again.
• Your telephone system may be programmed for one or two dial tones. Systems
with two dial tones have one for intercom calls and one for outside calls.
• Many features “time out” if you wait too long before performing the next step. If
this happens, you must hang up and start over.
• “Off-hook” means that the handset is lifted, and “on-hook” indicates that the
handset is in the cradle. For example, you must first go “off-hook” to make a call,
but you must go “on-hook” to end a call.
SOFTWARE COMPATIBILITY
Depending upon which software version your telephone system is using, some of the
features included in this guide may not be available for your endpoint. Check with
your system administrator to see which software version your telephone system cur-
rently uses and if there are any features restrictions for your system.
Your Model 8662 is compatible with the following Inter-Tel software:
• Inter-Tel
®
5000 system software v1.0 and later
• Axxess
®
system software v8.1 and later
• Unified Communicator
®
v2.1 and later
• Enterprise
®
Messaging v1.0 and later
CNF
CNF
CNF