Filter
Top Products
20
Inter-Tel
®
Model 8662 User Guide (ITP Mode)
GETTING STARTED
Instead of answering a ringing call, you can redirect it by pressing one of the fol-
lowing menu buttons:
• SEND TO V-MAIL: Sends the call directly to your voice mailbox. You will not
see this option if you do not have a mailbox.
• IC CALL TO DND: Places your endpoint in DND mode and blocks the call.
(See page 40 for more information about DND mode.)
• SEND TO DEST: Redirects the call to the intercom or outside number that you
enter. (See page 27 for more information about the Redirect Call feature).
Outside Calls
With outside calls, you can talk to people who aren’t members of your telephone sys-
tem. When you make an outside call, however, you must dial any area codes or long
distance digits that your telephone company requires.
Placing Outside Calls
To place an outside call:
1. With or without the handset lifted, press or the OUTGOING menu
button.
2. Dial the desired number.
NOTE: If you see a request for an account code and hear a single beep, you must
dial an account code before you can place your call (see page 61).
Depending on how your system is programmed, you may be able to use one of the
following methods to select an outgoing line, instead of pressing the OUTGOING
button:
• Dial the Outgoing Call feature code (default is ).
• Press an unlit button, if you have one.
• Dial a Select Line Group feature code (defaults are 92001-92208).
• Dial the Automatic Route Selection (ARS) feature code (default is 92000).
NOTE: Check with your system administrator to see if your system uses custom-
ized feature and access codes.
To request a callback (queue on to the line) if all outgoing lines are busy when you
try to call out:
When you hear busy signals, press and hang up. When the line is available, your
endpoint rings.
To cancel the queue request before your endpoint rings:
Press
.
OUTGOING
8
CALL
6
6