Filter
Top Products
19
Inter-Tel
®
Model 8662 User Guide (ITP Mode)
GETTING STARTED
If there is no answer or if the endpoint is busy when you place an intercom call,
you can do any of the following:
• To leave a station message: Press and then hang up.
• To leave a voice mail message: Press and wait for the message center to
answer. (See page 31 for more message options.)
NOTE: This option is only available if the called endpoint has a voice mailbox.
• To camp onto a busy extension: Stay on the line and wait for the endpoint to
become available. Do not hang up. After the system timer expires, you hear
music until the endpoint is available.
NOTE: You cannot camp on to an endpoint if it is in DND mode.
• To request a callback (queue on to the endpoint): Press and hang up. When
the endpoint is available, your endpoint rings. (To cancel the queue request
before the callback, press
.)
Receiving Intercom Calls
Your endpoint can receive both intercom and non-handsfree intercom calls. If the
handsfree feature is enabled on your endpoint, intercom calls are automatically
answered. Non-handsfree intercom calls (see page 18) override the handsfree option.
If your handsfree feature is disabled, or if you receive a non-handsfree intercom call,
you must pick up the handset or press a button to answer the call.
To enable or disable your endpoint’s handsfree answering feature:
With the handset in the cradle, dial
.
To receive an intercom call:
If the handsfree feature is enabled, the call is automatically answered.
If the handsfree feature is disabled, either press to answer, or lift the handset for pri-
vacy.
To receive a non-handsfree intercom call:
EITHER, Press or
to answer.
OR, Lift the handset for privacy.
NOTE: You must lift the handset if the caller has the Ring Intercom Always feature
(377) enabled.
MSG
MSG
6
6
3
1
9
IC