Filter
Top Products
Continuing to press RIGHT ARROW toward the end of conversation will link the two units back together
automatically when cursor hits the current position.
If you want to exit this function without having to browse to the end of the message, press RETURN any time
to force the KVT100 to link to the Visual Touch Braille Display.
NOTE: Do not forget to quit UNLINK mode after you used the read-back function.
It is faster if you use CTRL-E to jump to the current position of the conversation and press RIGHT ARROW
to link two units together.
Pressing the SHIFT-DIAL keys is another way to bring you back to LINK mode without disconnecting the
current call or the conversation.
MAKING A CALL IN ACOUSTIC MODE
1. Turn on KVT100.
2. Check status of the KVT100 by pressing CTRL-P to make sure your TDD is in acoustic mode. If it is
not, press CTRL-DIAL to change it to acoustic mode.
3. Place the telephone receiver down firmly in the rubber acoustic cups with the telephone cord on
the LEFT.
4. Dial the telephone number on your telephone numeric keypad, NOT on your KVT1005. Watch the
Vtouch after you dial the number for the call progress and the answer from the other party. Begin typing
your greeting message to start the conversation.
TELEPHONE CONVERSATIONS
1. When someone answers your TDD call with his/her TDD, the person’s response will end with GA (Go
Ahead). You now type back. Typing GA is like saying, “OK it is your turn to talk now.”
2. When both people are ready to hang up, type SK (instead of GA). This means “Stop Keying. “ When
both have typed SK the conversation is finished. Hang up the telephone by putting the handset back on
the phone. Turn the power switch to off.
NOTE: See back page of Quick Guide for more commonly used TTY abbreviations.
12
CHAPTER 2: USING YOUR VISUAL TOUCH BRAILLE-TTY PHONE