Filter
Top Products
27
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
MHz SCAN
MHz Scan allows you to scan a 1 MHz segment of the
band. The current 1 MHz digit determines the limits of
the scan. For example, if the current frequency is
438.400 MHz, then MHz Scan would scan from
438.000 MHz to 438.975 MHz. The exact upper limit
depends on the step size selected.
1 Press [VFO] to select VFO mode.
2 Select the desired band.
3 Press [MHz] (1 s) to start MHz Scan.
• The 1 MHz decimal blinks while scanning is in progress.
• Scan starts at the frequency currently displayed.
• To reverse the scan direction, turn the Tuning control
clockwise (upward scan) or counterclockwise
(downward scan).
4 To quit MHz Scan, press any key other than [LAMP],
[MONI], and [F].
■ Locking Out Memory Channels
Memory channels that you prefer not to monitor while
scanning can be locked out.
1 Recall the desired memory channel.
2 Press [F], [0] to switch Lockout ON (or OFF).
• A star appears below the memory channel number
to indicate that the channel has been locked out.
Note:
The L0 to L9 and U0 to U9 memory channels and the priority
channel cannot be locked out.
1
2