Filter
Top Products
17
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
MEMORY CHANNELS
In memory channels, you can store frequencies and
related data that you often use. Then you need not
reprogram those data every time. You can quickly recall
wanted channels by simple operation. A total of 200
memory channels are available for VHF and UHF.
You can also store a name for each memory channel.
For more information, see “NAMING MEMORY
CHANNELS” {page 20}.
SIMPLEX&REPEATER OR ODD-SPLIT MEMORY
CHANNEL?
You can use each memory channel as a simplex&
repeater channel or odd-split channel. Store only one
frequency to use as a simplex&repeater channel or two
separate frequencies to use as an odd-split channel.
Select either application depending on the operations
you have in mind.
Simplex&repeater channel allows:
• Simplex frequency operation
• Repeater operation with a standard offset
(If an offset direction and offset frequency are stored)
Odd-split channel allows:
• Repeater operation with a non-standard offset
Note:
Not only can you store data in memory channels, but you can also
overwrite existing data with new data.
The data listed below can be stored in each memory
channel:
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
N/A
N/A
N/A
Yes
Yes
Yes
Parameter
Simplex&
Repeater
Odd-split
Receive frequency
Transmit frequency
Tone frequency
Tone ON/OFF
CTCSS frequency
CTCSS ON/OFF
Frequency step size
Offset direction
Offset frequency
Reverse ON/OFF
Memory channel lockout
Memory channel name
AM/FM mode selection
(U.S.A./Canada only)
Yes Yes
Yes: Can be stored in memory.
N/A: Not applicable