Filter
Top Products
23
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
INITIALIZING MEMORY
If your transceiver seems to be malfunctioning,
initializing the transceiver may resolve the problem.
Remember that you need to re-program memory
channels after initialization. On the other hand,
initialization is a quick way to clear all memory channels.
Note:
While using the Channel Display or Transceiver Lock function,
you cannot do Partial Reset nor Full Reset.
VHF Band Defaults
UHF Band Defaults
■ Partial Reset (VFO)
Use to initialize all settings except the memory
channels, the Call channel, the DTMF channels, and
Memory Channel Lockout.
1 Press [VFO]+ POWER ON.
• A confirmation message appears.
• To quit resetting, press any key other than [VFO].
2 Press [VFO] again.
■ Full Reset (Memory)
Use to initialize all settings.
1 Press [F]+ POWER ON.
• A confirmation message appears.
• To quit resetting, press any key other than [F].
2 Press [F] again.
2
1
2
1
VFO
Frequency
Version
Tone
Frequency
Frequency
Step
U.S.A./
Canada
144.000
MHz
5 kHz 88.5 Hz
Europe/
General
144.000
MHz
12.5 kHz 88.5 Hz
VFO
Frequency
Version
Tone
Frequency
Frequency
Step
U.S.A./
Canada
440.000
MHz
25 kHz 88.5 Hz
Europe/
General
430.000
MHz
25 kHz 88.5 Hz