Filter
Top Products
GETTING STARTED
25
Axxess
®
Model 8500 Phone User Guide
REDIALING A NUMBER
Although most phones redial the last number dialed, your system administrator can
program your phone to redial the last number saved.
To use the Last Number Dialed feature (if enabled):
With or without the handset lifted, press . A line is selected automatically, and
the number is dialed.
To use the Last Number Saved feature (if enabled):
• To save the last number dialed: While the phone is idle or while listening to inter-
com dial tone, press .
• To redial the saved number: After selecting a line, press . The number is
dialed automatically.
USING A HEADSET
With an electret headset, you can talk on the phone handsfree, without using your
speaker and microphone.
NOTE: If your headset has a power-saver mode, make sure the system administrator
has the Headset Connect Tone flag enabled in the telephone system. If this flag is not
enabled, you may miss the first few seconds of incoming calls.
To connect a headset:
1. Unplug the coiled handset cord from the base of the phone. (Leave the handset in
the cradle.)
2. Insert the headset plug into the vacant handset jack.
3. While on-hook, enter the Headset On feature code ( ) or the Headset
On/Off feature code (
).
To disconnect a headset:
1. Unplug the headset cord from the base of the phone.
2. Plug the coiled handset cord into the vacant jack.
3. While on-hook, enter the Headset Off feature code ( ) or the Headset
On/Off feature code (
).
NOTE: If using a headset, press to connect and disconnect calls.
REDIAL
REDIAL
REDIAL
3
1
5
3
1
7
3
1
6
3
1
7