Using the Setup Program
57
Table 14. Peripheral Configuration Submenu (continued)
Feature Options Description
Base I/O address
(This feature is displayed
only if Parallel Port is set
to Enabled.)
• 378 (default)
• 278
Specifies the base I/O address for the parallel port.
Interrupt
(This feature is displayed
only if Parallel Port is set
to Enabled.)
• IRQ 5
• IRQ 7(default)
Specifies the interrupt for the parallel port.
DMA
(This feature is present
only when Parallel Port
mode is set to ECP.)
• 1
• 3 (default)
Specifies the DMA channel.
Audio Device • Disabled
• Enabled (default)
Enables or disables the onboard audio subsystem.
LAN Device • Disabled
• Enabled (default)
Enables or disables the LAN device.
Legacy USB Support • Disabled
• Enabled (default)
Enables or disables USB legacy support.