Filter
Top Products
49
4 Using the Setup Program
The BIOS Setup program can be used to view and change the BIOS settings for the computer. The
BIOS Setup program is accessed by pressing the <F2> key after the Power-On Self-Test (POST)
memory test begins and before the operating system boot begins.
✏
NOTE
For reference purposes, you should write down the current Setup settings. When you make
changes to the settings, update this record.
✏
NOTE
The Setup menus described in this section apply to the desktop boards with BIOS identifier
GB85010A.86A. Boards with other BIOS identifiers might have differences in some of the Setup
menu screens.
The Setup screen menu bar is shown below.
Maintenance Main Advanced Security Power Boot Exit
Table 6 shows the BIOS Setup program menu bar.
Table 6. BIOS Setup Program Menu Bar
Maintenance Main Advanced Security Power Boot Exit
Clears passwords
and Boot Integrity
Service (BIS)*
credentials, and
configures
extended
configuration
memory settings
Allocates
resources for
hardware
components
Configures
advanced
features
available
through the
chipset
Sets
passwords
and security
features
Configures
power
management
features
Selects boot
options and
power
supply
controls
Saves or
discards
changes to
set program
options
* For information about the BIS, refer to the Intel Web site at:
http://developer.intel.com/design/security/index1.htm