Filter
Top Products
Using the Setup Program
55
Boot Configuration Submenu
Maintenance Main
Advanced
Security Power Boot Exit
PCI Configuration
Boot Configuration
Peripheral Configuration
IDE Configuration
Diskette Configuration
Event Log Configuration
Video Configuration
The submenu shown in Table 13 is used to set the Plug & Play options, reset configuration data,
and the power-on state of the Numlock key.
Table 13. Boot Configuration Submenu
Feature Options Description
Plug & Play O/S
• No (default)
• Yes
Specifies if manual configuration is desired.
No lets the BIOS configure all devices. This setting is
appropriate when using a Plug and Play operating system.
Yes lets the operating system configure Plug and Play
devices not required to boot the system. This option is
available for use during lab testing.
Reset Config Data
• No (default)
• Yes
No does not clear the PCI/PnP configuration data stored in
flash memory on the next boot.
Yes clears the PCI/PnP configuration data stored in flash
memory on the next boot.
Numlock • Off
• On (default)
Specifies the power-on state of the Numlock feature on the
numeric keypad of the keyboard.