Filter
Top Products
55
10
SET MODE
DD
Scan pause timer
Selects the scan pause time. When receiving signals, the
scan pauses according to the scan pause time.
• 2–20 : Scan pauses for 2–20 sec. on a received signal,
and selected in 2 sec. steps. (default: 10 sec.)
• HOLD : Scan pauses on a received signal until it disap-
pears. Rotate [R-DIAL] to resume manually.
DD
Scan resume timer
Selects scan resume time. Scan resumes after the specified
period when the received signal disappears.
• 0 : Scan resumes immediately when the received
signal disappears.
• 1–5 : Scan pause 1–5 sec. after the received signal
disappears. (default: 2 sec.)
• HOLD : Scan pauses on the received signal even if it dis-
appears. Rotate [R-DIAL] to resume manually.
DD
Scan stop beep
Turns the scan stop beep function ON and OFF.
When the function is activated (“ON” is selected), a long beep
will sounds each time when signal is received during scan.
SCAN-STOP-BEEP
-ON
>OFF
----------------
SCAN-STOP-BEEP
>ON
-OFF
----------------
No beep is sound when
receiving a signal
A long beep is sound when
receiving a signal
SCAN-RESUME
-1SEC
-0SEC
----------------
SCAN-RESUME
-2SEC
-1SEC
-3SEC
>2SEC
-4SEC
-3SEC
-5SEC
>HOLD
-4SEC
-5SEC
----------------
Scan resumes after 2 sec. Scan resumes manually
SCAN-PAUSE
-4SEC
-2SEC
----------------
SCAN-PAUSE
-14SEC
-12SEC
-8SEC
-6SEC
-18SEC
-16SEC
-12SEC
>HOLD
>10SEC
-20SEC
----------------
Scan pauses for 10 sec. Scan pauses until signal
disappears