Filter
Top Products
32
6
MEMORY CHANNELS
■ Memory clearing
Contents of programmed memories can be cleared (blanked),
if desired.
qPush [MR S.MW] for 1 sec. to select the select memory
write condition.
• 1 short and 1 long beeps sound.
•“µ ” indicator blinks.
• Do not hold [MR S.MW] for more than 2 sec. otherwise the
memory contents will be copied to VFO.
wRotate [R-DIAL] to select the desired memory channel to
be cleared.
eWhile pushing [8 SET], rotate [R-DIAL] to select “CLEAR.”
• “CLEAR” item can also be selected by pushing [8 SET] several
times.
rPush [MR S.MW] for 1 sec. to clear the contents.
• 3 beeps sound.
• The cleared channel changes to blank channel
• Return to the select memory write condition.— “µ ” indicator
blinks. Push [DUALWATCH] to exit the select memory write con-
dition, then push [VFO MHz] to return to VFO mode.
☞NOTE: Be careful!— the contents of cleared memories
CANNOT be recalled even in bank channel opera-
tion.
FM
>CLEAR
-SKIP-:OFF
-MNAME:
-BNAME:
-BANK-:----
028
µ
.
144
.
010
FM
>CLEAR
-SKIP-:OFF
-MNAME:
-BNAME:
-BANK-:----
028
µ
.
144
.
010
Push for 1 sec.
MR
S.MW
FM
>CLEAR
-SKIP-:OFF
-MNAME:
-BNAME:
-BANK-:----
028
µ
.
144
.
010
>CLEAR
-SKIP-:OFF
-MNAME:
-BNAME:
-BANK-:----
FM
>BANK-:----
028
µ
.
144
.
010
is pushed
several times.
After
[R-DIAL]
SET
8
SET
8
MR
S.MW
SET TS:5.0kHz
√
MODE
ANL
AFCTSQL
FM
146010
PSKIP
-DUP
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16