Filter
Top Products
14 - 2
Parts and Functions
Top Panel
Charging Slots
There are 4 charging slots. Each slot holds one Li-ion battery and charges it independently of
the other slots. When a battery is placed in each slot, it immediately begins charging.
Charge/Analyze Slot
This is the 4th slot and the only one that can be used to analyze a battery. When a battery is
placed in this slot, it begins charging just as it does in the other three slots. However, if you
press the ANALYZE button, it runs the battery in this slot through the complete Analyze cycle.
For more information, see Using the Battery Analyzer on page 14-5.
Battery Capacity Indicator LEDs
These LEDs give a readout of the remaining battery capacity after it has run through a
complete analyze cycle.
For more information, see Battery Capacity Indicator LEDs on page 14-2.
Analyze Button
Press this button to start an Analyze cycle; see Using the Battery Analyzer on page 14-5.
Status LEDs
A status LED is located above each of the 4 battery slots. The color of the LED indicates the
charge status of the batteries in its slot.
Color This color indicates that the battery in the slot…
Green
Has completed its charge cycle and is ready for use.
Orange Is being charged at a maximum charge rate.
Red Encountered an error during the most recent charge cycle.
O
S
LO
T
4
B
A
T
TE
R
Y
CA
P
AC
IT
Y
1
0
0%
0%
ANAL
YZE
CHARGE/ANAL
YZE
1
2
3
4
Charging Slots
Status LED
Charge/Analyze Slot
Battery
Capacity
LEDs
Analyze
Button