Filter
Top Products
11 - 2
Parts and Functions
Front Panel
Terminal Well
Place the terminal in this well to communicate with a host device, power the terminal, and
charge its battery pack. If the host device is a workstation that uses ActiveSync,
synchronization begins immediately.
While seated in the terminal well, the main battery installed in the terminal charges. The base
completely charges a battery pack installed in the terminal seated in this well in 4.5 hours.
Auxiliary Battery Well
See Auxiliary Battery Well on page 11-3.
DOCK LED
Turns solid green when the terminal is properly seated in the base.
AUX Battery LED
Indicates status of the battery charging in the auxiliary battery well; see Back Panel on page
11-3.
For information about charging a battery in the auxiliary battery well, see page 11-6.
This color means…
Orange
The auxiliary battery is charging.
Green The auxiliary battery has completed charging and is ready for use.
Terminal Well
DOCK LED
Auxiliary Battery Well
AUX
Battery
LED
COMM LED