Honeywell 6500 PDAs & Smartphones User Manual


 
7 - 12
Power
Power system settings contains four tabs: Battery, Advanced, CPU Power Setting, and Wakeup Source.
Tap > Settings > System > Power.
Storage Card—You can install one memory card in Dolphin terminals (see Installing
Memory Cards on page 3-9). If a storage card is installed in the terminal, you can see
capacity and usage statistics for the card. Data stored on the SD card is not affected
when the operating system is upgraded. Autoinstall programs, for example, are stored
in \\Honeywell\Autoinstall so that they are always installed after an operating
system upgrade or factory reset. Contact a Honeywell technical support representa-
tive for more information on how to perform a factory reset. For contact information,
see Customer Support on page 13-1.
Battery Tab
The battery tab displays the power level status of the
main battery and the status of the backup battery.
You may also turn on/off the capability to charge the main
battery using the USB cable.
Note: The Backup Battery gauge registers either 0% or 100%.
The percentage is not an indication of the level of charge
remaining on the backup battery. An installed and
functional battery registers 100%. A total discharge or a
battery error registers 0%.
Advanced Tab
Determines power time-outs.
For On battery power, select from the drop-down list, the
number of minutes of inactivity you want to pass before the
terminal powers off when running on battery power.
For On external power, select from the drop-down list, the
number of minutes of inactivity you want to pass before the
terminal powers off when running on external power.