Filter
Top Products
Restore Factory Default Setting
WA I of the phone.
Please dstream is not
resp
Dire
RN NG: Restoring the Factory Default Setting will delete all configuration information
backup or print all the settings before you restoring factory default settings. Gran
onsible for restoring lost parameters and cannot connect to your VoIP service provider.
ctions for Restoration:
Disc efault settings.
nu, select “Config”, press
set” (Please refer to Table 5-1 of keypad flow chart)
g:
0-9: 0-9
show on the LCD)
For example: if the MAC address is 000b
onnect network cable and power cycle the unit before resetting factory d
ey pad configuration UI me
1. Step 1: Press “OK” key to bring up the k
“OK” to enter submenu, select “Factory Re
2. Step 2: Key in the MAC address printed on the bottom of the sticker. Please use the following
mappin
a. A: 22 (press the “2” key twice, “A” will show on the LCD)
b. B: 222
c. C: 2222
d. D: 33 (press the “3” key twice, “D” will
e. E: 333
f. F: 3333
8200e395, it should be key in as “0002228200333395”.
3. Step 3: Press the “OK” key again to move the cursor to “OK” button. Press “OK” key again to
orrect, the phone will reboot. Otherwise, it will exit to previous
NOTE: If there are digits like “22” in the MAC, you need to type “2” then press “->” right arrow key to
move the cursor or wait for 4 seconds to continue to key in another “2”.
confirm. If the MAC address is c
keypad menu interface.
Grandstream Networks, Inc. GXP-2000 Users Manual Page 29 of 33
Firmware 1.1.1.14 Last Updated: 12/2006