Filter
Top Products
2. Attended (or Supervised) Transfer: Press “Linex” button to make a call and automatically
OTE: To transfer calls across SIP domains, SIP service providers must support transfer across SIP
domains account SIP profile.
3-Way C
1. Initiate a Conference Call
: Place first call(er) on HOLD, call second party. Press the CONF
anyone, press CONF again or the original LINE button. This will resume two-way conversation.
nce: To end a conference, press HOLD. This breaks the conference and places
NOTE:
• Each lin cemail portal number to
be confi
• To chec ecks
the prim menu.
1. To enable/disable mute during a call, press “MUTE/DEL” button. The red Mute/Delete icon
(muted microphone) will flash on the LCD. Press the “MUTE/DEL” button to resume audio.
entries while using the “MAIN MENU” place cursor (use the arrows to move cursor)
Do
1. do not want to take a call. This will send the caller directly
2. n the screen). The
phone will not ring and send caller directly to voicemail. (see note above)
Spe
The speed dial button to
auto
e: T e
n icating the incoming call. Press the button to pick up the call. If any one of the 7
i associated with a call, the speed dial/BLF function will not work. For example: when
LF.
sterisk Busy Line Field
The
account on one of the multi-functional buttons, the Speed Dial function
will work when it that line is not in use.
place the ACTIVE LINE on HOLD. Once the call is established, press “TRNF” key to transfer the
call and hang up.
N
. Blind transfer will usually use the
primary
onferencing
GXP-2000 supports 3-way conferencing.
button then the LINE that is on HOLD (blinking). Repeat for third party.
2. Cancel Conference: If after pressing the “CONF” button, a user decides not to conference
3. End Confere
both parties on hold. To speak with an individual party, select the corresponding blinking LINE.
Check Messages (Message Waiting Indicator)
The blinking red MWI (Message Waiting Indicator) indicates a message is waiting. Press the MSG button
to retrieve the message. An IVR will prompt the user through the process of message retrieval. Press a
specific LINE to retrieve messages for a specific line account.
e has a separate voicemail account. Each account requires a voi
gured in the “voicemail user id” field.
k which line account has a message – 1) press the message button (this always ch
ary account), 2) check each line for stutter tone or 3) check missed calls using the
Mute/Delete
2. To delete
before the entry. Press “MUTE/DEL” to delete the digit.
Not Disturb
Press the “Mute/Delete” button if you
to voicemail.
Press the “Mute/Delete” button to set phone to ‘do not disturb’ (icon will be o
ed Dial
seven multi-functional buttons can be configured for speed dial. Press the
matically call the assigned extension.
he multi-functional buttons will function as LINE keys when all four primary lines are busy. Th
Not
LED will flash i d
functions keys s
first multi-functional button is in use, you cannot use it for speed dial/B
A
seven multi-functional buttons can be configured for Asterisk Busy Line Field function with a specified
. When Asterisk BLF is configured
Grandstream Networks, Inc. GXP-2000 Users Manual Page 14 of 33
Firmware 1.1.1.14 Last Updated: 12/2006