Filter
Top Products
Software Upgrade & Customization
The corresponding
onfiguration settings are in the ADVANCED SETTINGS configuration page.
irmware Upgrade through TFTP/HTTP
:6688/Grandstream/1.0.0.18
• 168.75.215.189
ey Pad Menu
ct
DVANCED SETTINGS page, enter the Upgrade Server’s IP address or FQDN in the “Upgrade Server”
uring this stage, the LCD will display the firmware file downloading process. If a firmware upgrade fails
hecksum test fails, etc), the phone will stop the upgrading process and re-boot using the
Firmware upgrades take around 20 seconds in a controlled LAN or 2-3 minutes over the Internet.
Grandstream recommends completing firmware upgrades in a controlled LAN environment whenever
possible.
No Local TFTP Server
For users who do not have local TFTP server, Grandstream provides a NAT-friendly TFTP server on the
public Internet for users to download the latest firmware upgrade automatically. Please check the
Support/Download section of our website to obtain this TFTP server IP address:
http://www.grandstream.com/y-firmware.htm
Software (or firmware) upgrades are completed via either TFTP or HTTP.
c
F
To upgrade via TFTP or HTTP, select TFTP or HTTP upgrade method. “Upgrade Server” needs to be set
to a valid URL of a HTTP server. Server name can be in either FQDN or IP address format. Here are
examples of some valid URLs.
• firmware.mycompany.com
There are two ways to set up the Upgrade Server to upgrade firmware: Key Pad Menu and Web
Configuration Interface.
K
To configure the Upgrade Server via Key Pad Menu options, select “Config” from the Main Menu, then
select “Upgrade”. Under this sub Menu, user can edit Upgrade Server in either an IP address format or
FQDN format. Choose “Save and use TFTP” or “Save and use HTTP” to select upgrade method. Sele
“Reboot” from the Main Menu to reboot the phone.
Web Configuration Interface
To configure the Upgrade Server via the Web configuration interface, open the web browser. Enter the
GXP-2000 IP address. Enter the admin password to access the web configuration interface. In the
A
field. Select TFTP or HTTP upgrade method. Update the change by clicking the “Update” button.
“Reboot” or power cycle the phone to update the new firmware.
D
for any reason (e.g., TFTP/HTTP server is not responding, there are no code image files available for
upgrade, or c
existing firmware/software.
. Each product has a unique TFTP server address.
Alternatively, download and install a free TFTP or HTTP server to the LAN to perform firmware upgrades.
A free Windows version TFTP server is available: http://support.solarwinds.net/updates/New-
customerFree.cfm.
Grandstream Networks, Inc. GXP-2000 Users Manual Page 27 of 33
Firmware 1.1.1.14 Last Updated: 12/2006