Filter
Top Products
COMPLETING AND ANSWERING PHONE CALLS
Handset, Speakerphone and Headset Mode
Handset can be toggled between Speaker or Headset. To switch between Handset and
Speaker/Headset, press the Hook Flash in the handset cradle or press the SPEAKER button.
Multiple SIP Accounts and Lines
The GXP-2000 can support up to 4 independent SIP accounts. Each account is capable of independent
SIP server, user and NAT settings. Each of the 4 line buttons (LINE1-LINE4) is “virtually” mapped to an
individual SIP account. In off-hook state, select an idle line and the name of the account (as configured in
the web interface) is displayed on the LCD and a dial tone is heard.
For example: Configure the 4 SIP accounts as “FreeWorldDialup”, “BroadVoice” , “FreeWorldDialup” and
“Asterisk PBX” respectively and ensure each is active and registered. When LINE1 is pressed, you will
hear a dial tone and see “FreeWorldDialup” on the LCD display; when LINE2 is pressed, you will hear a
dial tone and see “BroadVoice” on the LCD display; when LINE3 is pressed, you will hear a dial tone and
see “Asterisk PBX” on the LCD display.
To make a call, select the line you wish to use. The LED will light up solid red. Switch lines before dialing
y pressing the same LINE button one or more times. If you continue to press one LINE, the selected
ccount will circulate among the registered accounts.
For example: when LINE1 is pressed, the LCD displays “FreeWorldDialup”; If LINE1 is pressed twice, the
LCD displays “BroadVoice” and th made through SIP account 2 - BroadVoice.
Inc a specific accou e. When
the “virtually” mapped line is in use, the GXP-2000 will flash the next available LINE (from left to right) in
red.
A line is ACTIVE when it is in use
Completing Calls
There are four ways to complete
:
Take Handset/SPEAKER/Headset off-hook or press an available LINE key (activates
hone). The line e and the primary line (LINE1) LED is red. If you
ct another LINE key (altern nt). Enter the phone number and press the
SEND key.
2. R
EDIAL: Take Handset/SPEAKER/Headset off-hook or press an available LINE key (activates
eakerphone), the corre the last
r called.
SE THE MENU: Press the History and then
eceived Calls/Missed Cal ct and
OK again to dial. T urrently applies only to primary
SIP account (LINE 1)).
4. P
AGING/INTERCOM: This is only valid if the SERVER/PBX supports this feature and both the
e and PBX (e.g. As et
-hook, select the LINE
PAGE USING. Dial the p mber you want to Page/Intercom and press SEND key.
NO tone and dialed num
selected. The phone waits 4 seco y entry timeout) before sending and initiating the
call. Press the “SEND” button to override the 4 second delay.
b
a
e subsequent call will be
oming calls to nt will attempt to use its corresponding LINE if it is not in us
and the corresponding LED is solid red.
a call:
1. DIAL
speakerp
wish, sele
will have a dial ton
ative SIP accou
sp sponding LED will be red. Press the SEND button to
redial
numbe
3. U
R
OK button to bring up the Main Menu. Select Call
ls/Dialed Calls and select phone number. Press OK to sele
press he call will dial out in speaker-mode
. (C
phon
off
terisk) are correctly configured. Take the Handset/SPEAKER/Heads
key associated with account, press OK key to display LCD: LINEx:
hone nu
TE: Dial-
ber display occurs after the handset is off-hook and the line key is
nds (by default; no ke
Grandstream Networks, Inc. GXP-2000 Users Manual Page 12 of 33
Firmware 1.1.1.14 Last Updated: 12/2006