Filter
Top Products
CONFIGURATION WITH WEB BROWSER
dded Web s edded
ser to conf t’s IE or
ozilla Firefox.
CCESS THE WEB CONFIGURATION
he GXP IP Phone Web Configur hone-IP-Address
The GXP-2000 embe
TML pages allow a u
erver responds to HTTP/HTTPS GET/POST requests. Emb
rough a Web browser such as Microsof
H igure the IP phone th
M
A
MENU
T ation Menu URL:
http://P where the Phone-IP-Address
the IP address of the phone, wh
ND USER CONFIGURATION
fter requesting HTTP, you will se ase sensitive with maximum length
f 25 characters. The factory default password for the End User is “123”, for Administrator is “admin”.
ileg n. A non-
dministrator will receive an error
able 9: Device Configuration
is ich is displayed on the LCD screen.
E
A e a login screen. The password is c
o
Only the administrator has priv es to access the Advanced Setting and Account informatio
a message.
T – Basic Settings Definitions
E
This c n Menu. This field is ontains the password to access the Web Configuratio
nd User
Password
case sensitive with a maximum length of 25 characters.
IP Address
There GXP-2000 operates in two modes:
1 the Static IP mode are not used (even . DHCP mode: all the field values for
though they are still saved in the Flash memory.) The GXP-2000 acquires
its IP address from the first DHCP server it discovers on its LAN. The
DHCP option is reserved for NAT router mode. To use the PPPoE feature,
set the PPPoE account settings. The GXP-2000 establishes a PPPoE
session if any of the PPPoE fields are set.
2 following fields: IP address, Subnet . Static IP mode: configure all of the
Mask, Default Router IP address, DNS Server 1 (primary), DNS Server 2
(secondary). These fields are set to zero by default.
Time Zone
This p cified time zone. arameter controls the date/time display according to the spe
This p arameter controls time displayed in daylight savings time or not. If set to
Daylight Savings Time
“Yes”, then the displayed time will be 1 hour ahead of normal time.
Time Display Format
LCD t time display in 12 hour or 24 hour forma
D
Choose one of the following formats:
ate Display Format
Year-Month-Day •
Month-Day-Year •
• Day-Month-Year
D
Default is No. Display the clock instead of Date. If set to “Yes”, it will show the
isplay Clock instead of
Date
clock.
Grandstream Networks, Inc. GXP-2000 Users Manual Page 18 of 33
Firmware 1.1.1.14 Last Updated: 12/2006