GE 28127 Cordless Telephone User Manual


 
9
Call Timer
After you press TALK or SPKR button on the handset, the screen displays the built-in
call timer and begins counting the length of time of the call. The time will display for 
seconds after the call has ended.
Auto Stand-by
Placing the cordless handset in the charge cradle while the handset is Off the hook
(or during a call) automatically hangs up the handset.
Flash/Call Waiting
If you subscribe to the combined Call Waiting Caller ID service from your local
telephone company, you will receive Caller ID information (if available) on Call Waiting
calls. During a phone call, you will hear a beep to indicate another call is waiting on the
line and Caller ID information for the waiting call shows on the handset display.
To connect to the waiting call, press the
DELETE/ash button on the handset, and
your original call is put on hold.
To switch between the two calls, press the
DELETE/ash button.
NOTE: Some cellular phones do not support this feature, refer to
your cellular devices instruction Manual.
Last Number Redial
You may redial a number up to  digits long.
To quickly redial the last number you dialed:
1. Press the
TALK or SPKR button on the handset or press the Cell (SKR) button to dial the
number.
. Press the button, the number dials automatically.
-OR-
To quickly choose from any of the last three numbers you dialed:
1. Press the button rst, then use the or button to select the
desired redial number.
. Press the TALK or SPKR button on the handset, the number dials automatically.
-OR-
If you get a busy signal and want to keep dialing the number, press the button
to quickly redial the number.