Filter
Top Products
5
Dial the number and then press the TALK or SPKR button on handset.
-OR-
Press
the or button to select the desired record, then press the TALK or
SPKR button on handset.
-OR-
Press and hold the number key to get the corresponding speed dialing number.
. When nished, press the
END/cancel button on the handset to hang up.
NOTE: You may enter up to 32 pre-dial digits.
NOTE: If you want to delete the pre-dial number you entered, press
the DELETE/ash button until all of the digits are erased.
NOTE: To set the speed dialing number, refer to section “Phone
Book -> Adding the Speed Dialing Number”.
Cellular Calls
1. In standby mode, dial the desired number, press Cell (SKR) button.
NOTE: If more than one bluetooth cell phone device is connected
use the
or
button to select the desired device.
. Press Select (SKL) button to conrm.
4. Press the
END/cancel button when nished.
Answering a Call
Check the display to see who is calling.
Landline Calls
1. Pick up the handset, and press the TALK or SPKR button on the handset.
. When nished, press the
END/cancel button on the handset, or place the handset
in the cradle.
Cellular Calls
1. Pick up the handset, and press the Cell (SKR) button on the handset.
. When nished, press the
END/cancel button on the handset, or place the handset
it the cradle.