Filter
Top Products
4
Telephone Operation
Visual Indicators
IN USE Indicator on the Base
The IN USE indicator is lit when the phone is in use. It ashes when you receive a call.
TALK Indicator and SPKR Indicator on the Handset
The TALK Indicator or SPKR Indicator is lit when the handset is in use. It ashes when
you receive a call.
VMWI Indicator on Handset
IMPORTANT: In order to use this unit’s Visual Message Waiting
Indicator (VMWI) feature, you must subscribe to this service from
your phone company.
The VMWI indicator on the top of the handset ashes when you receive a new
message from your service provider.
Speakerphone Operation
NOTE: If you are using the speakerphone, remain close to handset
so the party you are speaking to can hear you.
• If you are using the handset and want to switch to the speakerphone, press the
SPKR button, press the END/cancel button to end conversation.
• If you are using the speakerphone and want to switch to the handset, press the
TALK button, press the END/cancel button to end conversation.
Volume Settings
When the handset is ON (in talk mode), you may adjust the receiver volume by
pressing the VOLUME 6 or 5 button on the side of the handset. There are four
volume levels to choose from. When the maximum or minimum volume level is
reached, the phone beeps twice. VOL 1 is minimum and VOL 4 is maximum.
Making a Call
Landline Calls
1. Press the TALK or SPKR button on handset. Dial the desired number.
-OR-