Filter
Top Products
9
Tone/Pulse
From the Phone Setting menu:
1. Use the or button to scroll to Tone/Pulse.
. Press the
Select (SKL) button to enter the menu.
. Use the
or button to select Tone or Pulse. The default is Tone.
4. Press the
Select (SKL) button to save your selection. You will hear a conrmation tone.
Handset Name
This menu allows you to enter a name for the handset, which displays on the idle
screen.
From the PHONE SETTING menu:
1. Use the
or button to scroll to Handset Name.
. Press the
Select (SKL) button to enter the menu.
. Use the number keys to enter a name (up to 15 characters). More than one letter is
stored in each of the number keys. For example, to enter Bill Smith, press the key
twice for the letter B. Press the 4 key times for the letter I. Press the 5 key times
for the letter L. Wait for 1 second, press the 5 key times for the second letter L,
and press the 1 key to insert a space between the rst and last name. Press the 7
key 4 times for the letter S; press the 6 key once for the letter M; press the 4 key
times for the letter I. Press the 8 key for the letter T; press the 4 key twice for the
letter H.
4. Press the
Store (SKL) button to save your setting. You will hear a conrmation tone.
NOTE: If you make a mistake, use the DELETE/ash button to
backspace and delete one character at a time.
Registration
Your packaged handset(s) are pre-registered and ready to use. It is not recommended
that a handset be registered again unless absolutely necessary. If you must re-
register a handset use the directions below.
From the PHONE SETTING menu:
1. Press and hold the
Page button on the base until the in use indicator ashes.
. Use the
or button to scroll to Registration.