Filter
Top Products
AG-168V SIP GATEWAY User Manual (V1.42)
38
Upgrade AG-168V IP GATEWAY
Telnet command to updating
Using telnet , connecting AG-168V FXS, input SuperPassword when registered.
Input ftp X command to update, the value range is 0-2 . detailed meaning is :
x-0 connecting to FTP server, getting the file to updating , and save in the sdram of
the phone. Read from palmtool in order to debug.
x-1 connecting to FTP server, getting the file to updating and refresh the firmware
x-2 connecting to FTP server , getting the file for the dial rule and refresh.
Using HTTP
Using HTTP, connecting AG-168V FXS gateway , input SuperPassword when
registered.
Press , promt the page. Detailed operation refer to
“updating and dial rule chaptor” of “configuration through webpage”
updating through Palmtool
Download the palmtool from www.atcom.com.cn, run the tool and set the ip address on
“IP ADDRESS ” , press the button of “phone settings” , change the “debug” to be “no
check” and save. After rebooting , press the button of “updating ” to get the newest
firmware to updating.
Prepare Updated program through FTP
You can ask the server provider for the latest version of program.
Operation
1. The service provider must have an FTP server. This server should allow anonymous