Filter
Top Products
AG-168V SIP GATEWAY User Manual (V1.42)
20
connecting with the GATEWAY or at the same segment of the GATEWAY, double click icon to
open the PalmTool. The index page of PalmTool will popup.
a) Input the IP address of the GATEWAY into
Local IP
field (such as 192.168.1.100), and
then click “GATEWAY Settings” button.
From Version1.24, use PalmTool to set the IP GATEWAY, please set debug as output or
output all firstly, or PalmTool cannot connect IP GATEWAY. The parameters of PalmTool is
same as the parameters in HTTP, so please refer to HTTP set chapter to learn how to set
IP GATEWAY
.
Telnet Configuration
On the PC choose Start>Run, and then type telnet 192.168.1.100 into Run field
in popuping Run dialog. Or input telnet 192.168.1.100 in the DOS window. Then
the following information will be displayed
.
AG-168V V1.39 settings
Password :
Then please type password. With debug is set as 0[disable], if type ordinary password
(default one is 1234), after Retun, you will see
Password : ****
P:\>
If you type super password, then you will see:
Password : ********
P:\>
Above information indicates that IP GATEWAY is under setting mode, and then you can set
the AG-168V IP GATEWAY by using the telnet commands.
AG-168V Telnet Commands Explanation
AG-168V Telnet Commands
Comman
d
Function
?
Supply command name and parameters