Filter
Top Products
AG-168V SIP GATEWAY User Manual (V1.42)
37
and then press .
Call when PSTN first Dual mode enabled
Call PSTN number
When PSTN first setted, the way of dial is the same as normal PSTN phone.
Call voip number
Press the cradle or the flash key of the normal phone, enable AG-168 to be in voip
state from pstn first mode. Dial after the dial tone. Refer to “
Call when Dual mode
disabled
” chaptor
Call when IP first Dual mode enabled
Dial voip phone
When ip first was setted , pick up the phone and dial as “
Call when Dual mode
disabled”
chaptor
Call PSTN phone
Predial the prefix number in the “dual mode prefix”, AG-168V will change to
PSTN line, call after the dial tone.
Emergency Call
When AG-168V is power off or in falure, the Normal phone would connect with the
PSTN LINE, work as the “LIFELINE” and call emergency number.