Filter
Top Products
AG-168V SIP GATEWAY User Manual (V1.42)
35
Syntax description:
No keyword and parameter
Usage:
Save the configuration and restart the AG-168V IP GATEWAY.
Command ping
Syntax description: ping IP address
Usage:
ping IP address of other NAT device
Relevant usage:
In telnet window, input ping xx.xxx.xx.xxan IP address and
return, then the result will be displayed. If the address is effective, “ping OK” will
be seen; if the address is ineffective, nothing will be seen. Fox example
:
P:\>ping 203.93.9.57
P:\>
ping OK
P:\>ping 27.56.120.56
P:\>
Note Usually, the echo time of ping command is no more than 1 second. So if the
result is not displayed in 5 seconds, ping command is fail.
ftp command
Syntax description: ftp value
Usage:
the system connects to the FTP server auto to get the corresponding file
and deal with it
.
Relevant usage: ftp X
X ranged from 0 through 2:
X-0: Connect to FTP Server to get the file of updating program and save it to the
SDRAM of the GATEWAY. Then the file can be read by PalmTool. This operation
aims at testing.
X-1: Connect to FTP Server to get the file of updating program and update program
Flash. This operation aims at updating program.
X-2: Connect to FTP Server to get the file of updating dial rules and update
program Flash. This operation aims at updating dial rule
.
Note When you use ftp 0 and ftp 1 commands, if the file get from FTP server is too large
or the net speed is too slow, then the process will not be seen in telnet window.
Please be patient. Using ftp command in telnet to get file spends almost same
minutes as getting file using GATEWAY. So if nothing is displayed after too long
time, it means that ftp is fail.