Filter
Top Products
AG-168V SIP GATEWAY User Manual (V1.42)
13
recommended way with SIP protocol used
.
dtmf
: Set DTMF signal sending way by selecting control string, inband audio,
signal keypad or rfc 2833 ,sip infofrom list box
.
dtmf payload:
set use RTP send DTMF’s RTPthe value range is 96-101
register ttl :
IP GATEWAY will send a keep-alive registration message to SIP
gatekeeper every “register ttl” seconds. The value range is 10-65535. Default is 60.
Super password :
Set super password. Default is 12345678
debug:
Set the debug level of the GATEWAY.
disable: Disable output the debug message by selecting this item.
output: Output the operation information to the window, such as register, input
by selecting this item.
output all: Output all debug information and data in test window by selecting this
item.
remote debug: Save the debug information in SDRAM of IP GATEWAY by
selecting this item.
no check
: Disable checking firmware tags when upgrading. This is not
suggested, because it will increase the risk of upgrading the wrong firmware into
the GATEWAY.
phone settings: