Filter
Top Products
AG-168V SIP GATEWAY User Manual (V1.42)
28
set registerttl X
Set register TTL. X is range from 10 through 65535 Sec. default value is 60
Sec.
set rtptos X
Set TOS segment of IP head package in RTP digital follow.
set rtpport XXXX
RTP port is the port transferring and receiving voice flow using UDP protocol.
XXXX is range from 1024 through 65535
.
set jittersize X
Set buffer size of RTP package. X is range from 0-32
.
set calltype X
Set call type of the GATEWAY. X is ranged from 0 through 2: 0: call out in
normal way; 1: call out in faststart and tunneling way. It is a recommended
way
.
set localtype X
This command used to set how IP GATEWAY log in gatekeeper. X is
ranged from 0 through 6: 0: use GATEWAY number as E.164 and SIP ID to
login the GK; 1: use GATEWAY number as E.164 and designated SIP ID by
set account XXX command; 2:use support automated negotiate about MD5
or CAT authentication system.3:use MD5 authentication account and pin;4:
use CAT authentication account and pin; 5: use SHA1 authentication
account and pin.
set dtmf X