Filter
Top Products
AG-168V SIP GATEWAY User Manual (V1.42)
36
Note All the Telnet commands of AG-168V IP GATEWAY should be written in low case
and the password is case sensitive.
The usage of AG-168V FXS
Receving calls
No matter what calls from IP or PSTN , the phone connecting to AG-168V FXS port
will ring . Mention you that there is call. You can pick up the handset or the speaker
of the normal phone.
Call when Dual mode disabled
Call with phone number:
1 Dial with handset: pickup the handset, dial after dial tone
2 Dial with speaker: press speaker, dial after dial tone
3.
Redial: press redial and call the last number
Call with ip address:
If not registered in gatekeeper and gateway disabled, dial with the ip address:
1. pickup the handset, call after dial tone, press # after numbers
2. Press speaker, input ip address after dial tone, press # after numbers
Notice: Dial with ip address, using * for · .
Call with GATEWAY
If registered in Gatekeeperdial the number.
Pick up the handset or Press speaker, dial the number after the dial tone