Furuno FS-1503 Telephone User Manual


 
A-5
8 MHz ITU SSB carrier frequencies (ITU RR APPENDIX 16)
The following frequencies are factory programmed.
8 MHz SSB (J3E) 8 MHz SSB (J3E)
ITU CH NO Ship RX Ship TX (ITU CH NO) Ship RX Ship TX
801 8719 8195 840 (01) 8101 8101
802 8722 8198 841 (02) 8104 8104
803 8725 8201 842 (03) 8107 8107
804 8728 8204 843 (04) 8110 8110
805 8731 8207 844 (05) 8113 8113
806 8734 8210 845 (06) 8116 8116
807 8737 8213 846 (07) 8119 8119
808 8740 8216 847 (08) 8122 8122
809 8743 8219 848 (09) 8125 8125
810 8746 8222 849 (10) 8128 8128
811 8749 8225 850 (11) 8131 8131
812 8752 8228 851 (12) 8134 8134
813 8755 8231 852 (13) 8137 8137
814 8758 8234 853 (14) 8140 8140
815 8761 8237 854 (15) 8143 8143
816 8764 8240 855 (16) 8146 8146
817 8767 8243 856 (17) 8149 8149
818 8770 8246 857 (18) 8152 8152
819 8773 8249 858 (19) 8155 8155
820 8776 8252 859 (20) 8158 8158
821 8779 8255 860 (21) 8161 8161
822 8782 8258
823 8785 8261 CH NOs in ( ) are ITU NOs (RR Section C-1).
Use 3-digit Furuno’s designators for
selection in this radiotelephone.
824 8788 8264
825 8791 8267
826 8794 8270
827 8797 8273
828 8800 8276
829 8803 8279
830 8806 8282
831 8809 8285
832 8812 8288
833 8291 8291
834 8707 8707
835 8710 8710
836 8713 8713
837 8716 8716
838 8294 8294
839 8297 8297
A channel can be recalled by hitting the keys [CH], [8], [0], [1], [ENT] for channel 801 as an example. CH NO and Rx
frequency appear on the display. The channel number is displayed in 4 digits, such as 8001. (Additional zero is
inserted automatically.) The Tx frequency and Rx frequency are checked by pressing the [ENT] key.