Filter
Top Products
4-5
Table 4-2 Maintenance (con’t)
Item Check Point Remedy/Remarks
Power cable Check for loosened or corroded connection
at power terminals.
Clean and tighten.
Battery Check that the battery is fully charged. If discharged, charge.
Feeder (coax
cable, control
cable)
Check for physical damage. Replace if damaged.
PCB
connection
Check that jumper cables between boards
are firmly connected.
Reconnect loosened
connections of jumper
cables.
Microphone Check that jumper cables between boards
are firmly connected.
Fasten if loosened.