Filter
Top Products
1-5
Turning AGC on/off
AGC is automatically turned on when frequency is changed, and “AGC” appears when AGC is
active. To turn AGC on or off manually, press the [MODE/1] key while pressing and holding
down the [ENT] key.
1.8 Selecting Frequency
Frequency can be selected by:
• Direct key entry (Free selection within marine bands for ship stations
where a qualified Radio Operator is available.)
• Channel number entry
• [FREQ/CH] control
A receiving frequency can be selected by one of the above methods, but there is a restriction in
selecting a transmitting frequency. This depends on how the equipment is programmed accord-
ing to the national radio regulation.
Frequencies are indicated by:
Voice frequencies: Designated by the CARRIER frequency. Assigned frequencies are 1.4 kHz
higher than the carrier frequencies.
Telex, DSC: Designated by the CENTER frequencies.
qerFXT
noitceleS
gnitteS
noitceleseerFON
UTIc slennah
ehtnislennahcllA
ybdetacidniXIDNEPPA
.ycneuqerfdnaHC
resUc slennahybdetacidni,SEY
ybteserP.emannoitats/HC
.tnegaONURUF