Ericsson Dialog 4425 IP Phone User Manual


 
Start the Phone – Log On/Off
BusinessPhone – Ericsson Dialog 4425 IP Vision24
Log On
The following options exist:
1 You are allowed to log on and log off the phone. This is the most
common option.
2 The telephone is always logged on with a default number. You
cannot log on or off. This option can be used for phones in
conference rooms, receptions etc.
3 The telephone is always logged on, with a default number, as in
option 2, but you can log on with your own extension number
and get your personal categories.
Option 1
The Log on menu is displayed:
Note: The Dialog 4425 IP Vision is powered by the LAN
connection or optionally via an external 24 volt AC/AC
adapter. If the telephone is powered by the LAN, no
additional power adapter is needed.
The LAN (or the external power adapter) must be
connected to the telephone before use. If the power
connection fails, your IP phone will not work.
If the SOS call function is disabled, the text For SOS calls, dial
112 is not shown. The number for SOS calls might vary between
countries.
z Log on Enter your extension number and press (see display).
If you have logged on using this telephone before, the extension
number used at the previous log on is displayed. In this case, you
do not have to enter your extension number; just press Log on to
go ahead.
If a password is not required, the display shows your extension
number, and the phone is ready for use:
Settings CallList Contacts
CorpDirectory Web
User not logged on!
12:46 12 May 2003
Log on with: 9318
For SOS calls, dial 112
Erase Log on