Filter
Top Products
~40~
11
the character. For example, you are editing the
message 1 as “Meeting now.”
(3) When finished, press SAVE soft key to save
change. You will see the Text Message ID as 01
on the upper right corner of the LCD screen.
5. Sending a text message:
a. While viewing the message, press Intercom key
followed by a Handset ID or a Group ID (01-09).
b. The current message is sent.
c.
There will be no acknowledgement returned.
6. To erase or edit the current messages:
a. Press Menu-7-2 to enter outbox text message.
b.
Press OPTION soft key to erase or edit the
current message:
(1) Press “1” and confirm to erase message.
Subsequent messages will be moved up in the
Outbox.
(2) Press “2” to edit message. Follow the instructions
above for entering a new message.
11
Meeting now
2. Up to 9 most frequently used PBX feature codes
can be pre-programmed.
Settings: ÇÈ
7. Receiving a text message:
a. When a message arrives, a double beep alerts the arrival of a text
message.
b. The text message remains on the LCD display for 8 seconds and
then is automatically stored in the Inbox.
8. Viewing received text messages:
a. Press Menu-7-1 to enter Inbox menu
b. The LCD displays Message 01, the most recent received message.
Use ¿or À to view previous messages. The LCD displays Empty if
there is no inbound text message.
c.
Press SAVE soft key to return the message to Inbox.
d.
Press DELETE soft key and confirm to delete the current message.
Subsequent messages will be moved up in the Inbox.
Programmable PBX Options
1. When DuraFon 1X base unit installed behind the PBX system, it is
feasible to pre-program some PBX features along with their feature
codes into the system.
SAVE12 ODELETE
9. Name Tag
0. PBX Options
3. Name and enter PBX feature codes:
a. Press Menu (Right) soft key while the handset is
in standby.
b. Press “5” following by “0” to enter “PBX Options”
menu.
c.
Press ADD soft key to edit a PBX feature to be
memorized.
d. Key in the name of the PBX features just like
editing a phonebook entry i.e. PBX Transfer.
Press SAVE to confirm your entries.
e. Key in the feature code of the correspondence
PBX feature i.e. Flash*70. Press SAVE to confirm
your entries.
f. The first PBX feature and the correspondence
feature code you enter will appear on the LCD
screen.
[note] “F” represents the Flash signal
g. Press Option soft key to Erase or Edit the PBX
feature you program into the system
h. Repeat the same operation to edit the second and
even the third PBX feature that you will use
frequently.
4.
Using pre-programed PBX feature during the call.
a.
Press OPTION soft key while the handset is in
talk mode.
b. Press the correspondence number of the function
you want to perform i.e. press 1 to perform “PBX
Transfer” function
c. Press END when you finish the desired function
and back to standby mode.
11 01
Meeting now
A
DD12 OOPTION
11 01
Please enter
Ext. #: 02
Send this
message to
Group 02
11 01
Sending…
Notes:
1. This feature would be useful if the DuraFon 1X base unit is
adjunct to a PBX system.
2. Only “Mute” function will be displayed if you have not pre-
programmed any PBX features into the system.
3. The DuraFon 1X’s Programmable PBX Options may not function
11
Empty
A
DD12
11
Feature Name?
Caps = *
SAVE12 ODELETE
11
Feature Code?
SAVE12 ODELETE
11
PBX Transfer
F*70
A
DD1 OPTION
11
00:00:16
Volume: 4
OPTION HOLD
11
1. PBX Transfer
0. Mute
~39~